TySOM Embedded Prototyping Boards

Recently, FPGA vendors have released SoC FPGAs that integrate ARM®-based microprocessors with their respective high-performance FPGA technology in a single chip to enable more robust integration of


  embedded designs. Developers who create a complex embedded design need only a single integrated IC with a microprocessor, DSP and FPGA to optimize system performance, flexibility and scalability. SoC FPGAs such as Xilinx® Zynq ™ contain the FPGA technology of the ARM Cortex ™ -A9 and Xilinx 7000 series with different capacities of logic cells, BRAM, DSP slices and I / O pins.

With such powerful devices, designers can create even more complex embedded systems. To do this, however, they need industry-proven, powerful development tools and prototyping platforms. eVisionSystems meets this demand with TySOM - the new series of development and prototyping boards with Xilinx Zynq devices and a complete set of peripheral devices and interfaces.

There is no doubt that mere hardware is not enough for the first success of a complex embedded system. Choosing the right hardware design and verification tools for the FPGA simulation and software development environment for processors and microcontrollers is as important as choosing a hardware platform.


TySOM device family

TySOM is a family of development boards for embedded applications that have all of the programmable Xilinx® Zynq ™ modules that combine FPGA with ARM® Cortex processor. Thanks to the large number of peripheral devices supplied, these cards are suitable for various embedded applications such as automotive, IoT, industrial automation or embedded HPC.





Display per page
Sort by

TySOM-3 Embedded Prototyping Board

Product no.: TySOM-3

TySOM-3-ZU7 is a compact prototyping board with Zynq® UltraScale + ™ MPSoC device, the 64-bit processor scalability north and control control with various and hard motors for graphics, video, waveform and packet processing.

TySOM-1 Embedded Prototyping Board

Product no.: TySOM-1

TySOM-1 is a compact board containing medium size Xilinx Zynq-7000 All Programmable FPGA with dual-core ARM Cortex A9 and rich selection of peripherals to provide a complete and universal physical prototyping platform for a broad range of embedded designs and IoT applications. 

FMC-ADAS Automotive Daughter Card

Product no.: FMC-ADAS

The FMC-ADAS daughter card enables the prototyping of designs for vehicle and driver assistance systems with TySOM motherboards.

TySOM-M-MPFS250 Prototyping Board

Product no.: TySOM-M-MPFS250

TySOM-M-MPFS250 is designed to assure flexibility in selecting peripherals to leverage all the features of PolarFire MPFS250 device.

TySOM-3A Embedded Prototyping Board

Product no.: TySOM-3A

TySOM-3A-ZU19EG is a compact SoC prototyping board featuring Zynq® UltraScale+™ MPSoC device which provides 64-bit processor scalability while combining real-time control with soft and hard engines for SoC prototyping solution, IP verification, graphics, video, packet processing and early software development.

TySOM-1A Embedded Prototyping Board

Product no.: TySOM-1A

TySOM-1A is a compact board containing Xilinx Zynq-XC7Z010 All Programmable device with dual-core ARM Cortex A9 and a selection of peripherals to provide a complete prototyping platform for embedded system designs and IoT applications. 

FMC-INDUSTRIAL Industrial Communication Daughter Card


The FMC-INDUSTRIAL card enables prototyping of industrial applications for which serial communication interfaces are required.

TySOM-2 Embedded Prototyping Board

Product no.: TySOM-2

TySOM-2 is a compact prototyping board that is produced with XC7Z100 chip - the largest capacity among Zynq 7000 family devices. 

FMC-INTF Interface Daughter Card

Product no.: FMC-INTF

The FMC-INTF daughter card offers a good selection of commonly used peripheral devices such as PCIe, Gigabit Ethernet, USB and more.

TySOM-2A Embedded Prototyping Board

Product no.: TySOM-2A

TySOM-2A is a compact prototyping board containing mid-range Zynq-7000 module (Z-7030). 

FMC-IOT Internet-of-Things Daughter Card

Product no.: FMC-IOT

The FMC-IOT daughter card offers peripheral devices and interfaces that are used in embedded designs and are the key to IoT

FMC-NET Networking Daughter Card

Product no.: FMC-NET

The FMC-NET card enables prototyping of network designs by providing peripheral devices such as Gigabit Ethernet, WLAN and others.

FMC-NVMe High-Bandwidth, Low Latency Memory Expansion Card

Product no.: FMC-NVMe

FMC-NVMe expansion daughter card provides four NVMe interfaces (two on top and two on bottom side of the board). 

FMC-PCIe High-Bandwidth | High Throughput Serial Bus Daughter Card

Product no.: FMC-PCIe

The FMC PCIe expansion daughter card is used as a PCIe root complex and Nord has two PCIe x4 interfaces or one PCIe x8 interface.

FMC-QSFP High Speed Links Daughter Card

Product no.: FMC-QSFP

FMC-QSFP card provides QSFP+ and SFP+ extension of FPGA prototyping boards with standard FMC connectors. 

FMC-VISION Multimedia Daughter Card

Product no.: FMC-VISION

The FMC-VISION card offers multimedia interfaces for monitors and cameras, which are common in various designs such as embedded vision.


Plus Vat for enduser and companies located in Germany