Accessories Dediprog

The 1.27 mm 2x4 cable with socket strip is used to connect the BBF to the 1.27 mm 2x4 SMT pin strip soldered to the board.

The 1.27mm 2x4 Cable with Female Header is used to connect SO Connection Adaptor for EM100 & EM100Pro or SO8 Connection Adaptor for BBF to 1.27mm 2x4 SMT male header soldered on board.

The 1.27mm 2x8 Cable with Female Header is used to connect SO Connection Adaptor for EM100Pro & EM100Pro-G2 or SO16W Connection Adaptor for BBF to 1.27mm 2x8 SMT male header soldered on board.

The adaptor (SO16W) with 2x4 1.27mm male header is used for EM100 & EM100Pro to connect the 2x4 1.27mm cable to the SO16W SPI socket soldered on the application board.

The Reference Flash Adapter can be used to check the code developed with the E100Pro.

The adapter (SO8W) for EM100Pro is connected to the SO8W-SPI socket on the application board using the 2x4 1.27 mm cable.

The reference flash adaptor is soldered with 1.27mm 2x4 male header, SO8W engineering socket, and 2.54mm 2x4 male header.

The 1.27mm 2x4 SMT male header can be used to solder directly to the serial flash footprint on your application with SO8W or SO8N packages.

The SO8 test clip for EM100, EM100Pro and SF600 is used to connect the SF600 to the serial flash soldered on the board.

SPI adapter for SOP8N and EEPROM.

The SO16W test clip is used to connect the SF600 to the serial main flash soldered to the board.

SPU adapter for SOP8W SPI and EEPROM

The 1.27mm 2x8 SMT male header can be used to solder directly to the serial flash footprint on your application with SO16W packages.

SPI Adapter for SOP16 SPI and EEPROM.

The 10-Pin Split Cable has a 14-pin header, which can be connected to the SF100 ISP header directly.

The 1.27mm 2x4 SMT male header can be used to solder directly to the serial flash footprint on your application with SO8W or SO8N packages. 

The adaptor and cable are used for SF600 to convert 2.54mm 2x10 female header to 1.27mm 2x10 female header.

The ISP-SP-CB 10-Pin Split Cable has a 14-pin header which can be connected to the SF100 ISP header directly.

SO8 Connection Adaptor for EM100Pro-G2 & EM100Pro is used to connect EM100Pro-G2 or EM100Pro (2.54mm 2x10) to 1.27mm pin header soldered on the application.

The adaptor (SO16W) with 2x4 1.27mm male header is used for EM100 & EM100Pro to connect the 2x4 1.27mm cable to the SO16W SPI socket soldered on the application board. 

The backup boot flash QUAD (BBF-QUAD-8W) enables the application controller to work with the backup SPI flash used.

This 20-Pin Split Cable has a 20-pin header, which can be connected to the ICP Port of programmer or ISP adaptor directly. User can use it on StarProg-ATE/StarProg-A/SF700.

The backup boot flash DIP automatically forces the application controller to work with the backup SPI flash.

The 14-Pin Split Cable has a 14-pin header, which can be connected to the StarProg-ATE header (For ATE Port) directly. 

Backup Boot Flash automatically forces the application controller to work with the backup SPI flash used in the two SO8W sockets.

BBF Grabber Cables For Dual SPI

Forces the application controller to work automatically with the backup SPI flash inserted in the SO16W socket of the tool.

The ISP-UADP-127 is a universal adapter for the SF100.

The 10-Pin Split Cable has a 10 pin header which can be connected to the Backup Boot Flash (BBF) Modules directly.

Backup Boot Flash automatically forces the application controller to work with the backup SPI flash used in our SO8N socket tool.

The BBF SO16W Test Clip is used to connect the Backup Boot Flash Tool to the Main Serial Flash soldered on board.

The SO16W connection adapter for BBF is used to connect the backup boot flash module SO16W socket with the 2 x 8-pin header.

Backup Boot Flash automatically forces the application controller to work with the backup SPI flash used in our SO8W socket tool.

The Intel ISP Adaptor C is for connecting EM100Pro-G2, SF600, and SF600Plus to Intel motherboard.

The BBF Dual SO16W test clip is used to connect the dual backup boot flash tool to the two flashes soldered to the card.

The SO8 connection adapter for BBF is used to connect the backup boot flash module SO8W socket with the 2 x 4-pin header.

The ME-SW-ADP-2 AC switching power supply stabilizes the signal transmission when there is insufficient USB power supply.

The BBF SO8 Test Clip is used to connect the Backup Boot Flash Tool to the Main Serial Flash soldered on board.

The Intel ISP Adaptor C2 is for connecting EM100Pro, EM100Pro-G2, SF600, and SF600Plus to Intel motherboard.

The BBF Dual SO8 Test Clip is used to connect the Dual Backup Boot Flash Tool to the Two Main Serial Flash soldered on board.

BBF cable

SF100 To BBF Cable is used to connect SF100 programmer to BBF module.

The EM100Pro DIP Cable is used to connect the EM100Pro to the target application using DIP engineering socket.

The Dediprog IN-EMMC-ADP is an adapter for an Intel eMMC carrier board.

The Dediprog IN-EMMC-SW is a special adapter for Intel eMMC Switch Board.

The socket is designed for chips with SO16W 300 mil package. The socket can be soldered directly on the SO16W 300 mil PCB foot print.

This socket is designed for chips with SO8W 207 mil package. The socket can be soldered directly on the SO8W 207 mil PCB foot print.

The 10-pin split cable has a 10-pin header that can be connected directly to the SF600 programmer.

The Intel ISP Adaptor A is only used to connect SF100 to Intel Motherboard.

This socket is designed for chips with SO8W 207 mil package. The socket can be soldered directly on the SO8W 207 mil PCB foot print.

The Intel ISP Adaptor B is used to connect SF600/SF600Plus to Intel motherboard.

The Intel ISP Adaptor B2 is used to connect SF600/SF600Plus to Intel motherboard.

The Intel ISP Adaptor A2 is only used to connect SF100 to Intel Motherboard.

The 10-Pin Split Cable has a 14-pin header (only 10 of them are used for the ISP Split Cable) which can be connected to the EE100 ISP header directly.

The 10-Pin Split Cable has a 14-pin header (only 10 of them are used for the ISP Split Cable) which can be connected to the EE100 ISP header directly.

ISP-SPI-SF20 is the ISP adaptor of SF700. It supplies ICP port in 20-pin connector and ATE port in 10-pin connector.

ISP-SPI & IIC is the ISP adapter from K110 that provides the ICP port in a 14-pin connector for SPI / IIC programming.