Accessories Host Adapter

10-Pin Grabber Clip Split Cable makes it easy to connect your Aardvark I2C/SPI Host Adapter, Beagle I2C/SPI/MDIO Protocol Analyzer, or Cheetah SPI Host Adapter to your target with individual flying leads.

This cable attaches to the ribbon cable on the Aardvark I2C/SPI Host Adapter or the Beagle I2C/SPI/MDIO Protocol Analyzer and provides individual leads for each pin.

The CAN/I2C Activity Board Pro is the ideal tool for the embedded systems developer working with CAN and I2C protocols. This board provides known-good target devices to help developers get up and running quickly.

The Digital I/O Cable with Grabber Clips provides grabber clips to help connect the digital IO interface of the Beagle USB Protocol Analyzers and Komodo CAN Interfaces to external logic.

The Promira Mounting Plate provides a convenient way to secure and stabilize the Promira Serial Platform to any work surface. 

The CAN Terminator is a DB9-Male plug that terminates the CAN lines with a 120 ohm resistor.

The CAN Split Cable is a 1 ft cable with 2 DB9-male connectors on one end and 1 DB9-female connector on the other. This cable is useful to tap an existing CAN network with the Komodo CAN Solo or the Komodo CAN Duo Interface.

This is a replacement cable for the Promira Serial Platform.  The 34-pin end has a locking friction ramp to ensure good connectivity with the  Promira  Serial Platform, while the end is a 10-pin, 5x2 0.010" standard header.

2m DVI cable with DDC breakout header

This is a replacement cable for the PromiraTM Serial Platform.  

The EEPROM Socket Board provides embedded systems engineers with an easy and cost-effective method of programming I2C- and SPI-based memory devices.

This cable attaches to the ribbon cable end directly on the Promira Serial Platform and allows you to connect any of the 34 Promira platform pins to your target.  

This package contains one 34-Pin Split Cable along with 10 grabber clip ends that slide onto the split cable. 

The Flash SOIC-16 Socket Board - 10/34 provides embedded systems engineers with an easy and cost-effective method of programming SPI-based Serial Flash chips using Total Phase's Cheetah™ SPI Host Adapter, as well as the Promira™ Serial Platform with any active SPI option enabled and the Flash Center™ Software.

The I2C/SPI Activity Board is a great sanity check for the expert developer.

Grabber Clip Ends slide on to all Total Phase split cables.

The Flash SOIC-8 Socket Board - 10/34 provides embedded systems engineers with an easy and cost-effective method of programming SPI-based Serial Flash chips using Total Phase's Cheetah™ SPI Host Adapter as well as the Promira™ Serial Platform

The USB OTG Mini-Plug Cable Set provides two convenient cables for the USB OTG developer to use with either the Beagle USB 5000 v2 Protocol Analyzer, the Beagle USB 480 Protocol Analyzer or the Beagle USB 12 Protocol Analyzer.

The High-Speed SPI Flash Demo Board is a useful tool for developers working with high-speed SPI flash memory. 

The Flash SOIC-8 Socket Board provides embedded systems engineers with an easy and cost-effective method of programming SPI-based Serial Flash chips using Total Phase's Cheetah SPI Host Adapter and the Flash Center Software.

This power kit includes one 5 foot Cat 5 Ethernet cable and our USB Micro B Universal Power Adapter.

The Level Shifter Board provides voltage level translation from 1.2V to 3.3V for the Aardvark I2C/SPI Host Adapter, the Beagle I2C/SPI/MDIO Protocol Analyzer, and the Cheetah SPI Host Adapter.

SMA cable for digital input or output on the Beagle USB 5000 SuperSpeed Protocol Analyzer

Connect USB devices quickly and easily to the Beagle USB 12 Protocol Analyzer or the Beagle USB 480 Protocol Analyzer with the USB A-B 1 ft cable.

Connect USB devices with captive USB-A connectors quickly and easily to the Beagle USB Protocol Analyzers.

This power adapter enables you to power your Promira™ Serial Platform directly from any wall outlet.

2m VGA cable with DDC breakout header