Accessories Measuring

Siglent SPL2016 Logic Probe hardware kit for the SDS5000X series of oscilloscopes.

BNC terminated coaxial cable (1 m length)

Rack Mount kit for SDS5000X
 

The Siglent HPB4010 probe is a 40 MHz passive probe for voltages above 300 V.

SDG6000X IQ modulation activation license. Unlocks the IQ modulation capabilities for SDG6000X series AWGs.

20 dB Attenuator

Increase the voltage and current output capabilities to generators like the SIGLENT SDG family

Enables measurement of 700 V differential and common mode voltage in 100:1 mode.

With Isolated channel module (ISFE) you can Add isolated inputs to your oscilloscope.

The Micsig CP2100A current probe can measure both DC and AC current, 10A to 100A.

The Siglent SDS-5000X-PA license enables the performance analysis option for the SDS5000X series oscilloscopes.

The Micsig RCP500 current probe provides measurements from 200mA to 500A and a bandwidth from 15 Hz to 300 KHz. 

The Micsig RCP500 current probe provides measurements from 200mA to 500A and a bandwidth from 15 Hz to 300 KHz. 

Rackmount kit , compatible with the SDG800, SDG1000 ，SDG1000X,SDG2000X,SDG5000 and SDG6000X series function generator and SDM3045X, SDM3055, SDM3065X.

Enables measurement of 700 V differential and common mode voltage in 100:1 mode.

Enables measurement of 1300 V differential and common mode voltage in 500:1 mode.

Soft Carry Case for SDS1000DL+/CML+, SDS1000X, SDS1000X-E, SDS2000X-E Series

The Siglent SDM-PB is a pair of multimeter pin test leads (1000V).

Soft Carry Case for SDS2000X, SDS5000X, SSA3000X，SVA1000X

The Micsig CP2100A current probe can measure both DC and AC current, 10A to 100A.

The Siglent SDS-5000X-16LA is the activation license for the 16-channel logic analyzer option of the SDS5000X series.

N(M)-N(M) Kabel, 100 cm, 18 GHz

The Siglent SDS-5000X-MIL1553B trigger and decoding license unlocks the MIL option of the SDS5000X oscilloscopes.

N(M)-SMA(M) cable, 100cm, 18 GHz

Rackmount kit , compatible with the SDS1000X-E model

Enables measurement of 700 V differential and common mode voltage in 100:1 mode.

Siglent CP4050 probe has a bandwidth of 100 KHz, 20 A maximum continuous current and 60 A peak current.

For use with voltage and current probes and the Power Analysis option available on the 4-channel devices of the SDS2000X oscilloscopes.

The Siglent CP4070 probe has a bandwidth of 150 KHz, 70 A maximum current and 200 A peak current.

A probes comb for the Ikalogic SP209 Logic Analyzer series.

Activation license for the advanced measurement kit that includes Channel Power, on-screen waterfall / spectrum analysis graphics and more.

The Siglent CP4070A probe has a bandwidth of 300 KHz, maximum continuous current of 70 A and 200 A peak current.

Male 0.7 meter length N to BNC cable.

Siglent SDS2000XP-Flexray enables serial triggering and decoding with oscilloscopes of the SDS2000X Plus series.

The Siglent CP4020 probe has a bandwidth of 100 KHz, 20A maximum continuous current and 60 Ampere peak current.

The N-N cable has 6 GHz bandwidth.

The Siglent CP6030 probe has a bandwidth of 50 MHz, maximum continuous current of 30 A and a peak current of 50 A.

Siglent SDS2000XP-MIL1553B enables serial triggering & decoding for the SDS2000X Plus oscilloscopes.

With 1 Year Warranty

Oscilloscope Demonstration Board Provides standard (Sine, Square), pulse (PWM, Burst), and serial (I2C, SPI, UART, LIN, and CAN) outputs.

The Siglent N-SMA cable has 6 GHz bandwidth.

The Siglent CP5030A probe has a bandwidth of 100 MHz, maximum continuous current of 30 A and a peak current of 50 A.

The Siglent SDS2000XP-16LA is the activation license for the MSO function software for the SDS2000X Plus oscilloscope.

The Siglent CP5150 probe has a bandwidth of 12 MHz, a maximum continuous current of 150 A and a peak current of 300A.

1X/10X attenuation, 85/18pf, 1M/10Mohm, 6M/70MHz, 300V/600V, operating temperature -15 to 75 degrees

Siglent F503ME Mechanical Calibration Kit: Open(M), Short(M), Match(M,50),Through(F-F), 4.5 GHz

The Siglent CP5500 probe has a bandwidth of 5 MHz, a maximum continuous current of 500 A and a peak current of 750A.

10X CAT II 400V, 300M-bandwidth, SHS1000 handheld oscilloscope standard 

Siglent SDS2000XP-2BW35 enables a bandwidth upgrade to 350 MHz.

PB925 Specifications: 10X CAT II 1000V, CAT III 600V, 250M-bandwidth, SHS1000  handheld oscilloscope option

The SAP1000 is a 1 GHz active probe for use with the SIGLENT SDS5000X series of oscilloscopes.

The Siglent SDS2000XP-4BW20 enables a bandwidth upgrade to 200 MHz.

The Siglent DPB4080 differential high-voltage probe has a bandwidth of 50 MHz and 800 V maximum input differential voltage.

1X/10X attenuation, 85/16pf, 1M/10Mohm, 6M/150MHz, 300V/600V and operating temperature -15 to 75 degrees.

The Siglent SDS2000XP-4BW35 enables a bandwidth upgrade to 350MHz.

The Siglent DPB5150 differential high voltage probe has a bandwidth of 70 MHz and 1500V maximum input differential voltage.

The Siglent LPA10 is an active probe adapter for the Lecroy ZD1000 and AP033 probes. 

1X/10X attenuation, 46/12pf, 1M/10Mohm, 10M/300MHz, 300V/600V, operating temperature -15 to 40 degrees.

Includes Quasi-peak detector, RBW bandwidths of 200/9k/120kHz, and a 6dB filter used for EMI Pre-compliance measurements.

The Siglent SDS2000XP-4BW50 enables a bandwidth upgrade to 500 MHz (2-channel oscilloscope)

The Siglent DPB5150A differential probe has 100 MHz bandwidth and 1500 V maximum input differential voltage.