Dediprog EM100Pro-G2 SPI NOR Flash Emulator

The Dediprog EM100Pro-G2 SPI NOR Flash Emulator emulates ALL SPI NOR Flash in the market.

€530.00*

% €749.00* (29.24% saved)
Content: 1

In Stock, Delivery time: 1 - 3 days

Further information
Request a quote
Paypal-icon
Mastercard-icon
visa-icon
klarna-icon
Sepa-lastschrift-icon
invoice-icon
Product number: EM100Pro-G2
Manufacturer: Dediprog

Description

EM100Pro-G2 is a DediProg SPI NOR Flash emulator with integrated high-speed DRAM memory that provides the best code update performance. This advanced tool has been developed in close collaboration with SPI NOR Flash suppliers to emulate the behavior of all SPI NOR Flashs on the market and also the next generation of SPI NOR Flashs.
It provides engineers with a flexible development and test tool for any embedded project that uses an external SPI NOR Flash. It enables rapid in-circuit firmware test cycles during development.


The EM100Pro-G2 increases productivity by downloading firmware code or data to the emulator in seconds at densities up to 2 GB. It also provides the "SPI BUS Analyzer" feature that collects all SPI commands and data on the SPI bus to support the debugging process.
It speeds up your firmware development and testing because you don't have to remove, reprogram and reinstall the SPI flash every time you test a code change.

If you want to end the "program/insert/boot/remove/delete" cycle, this is the tool for you.

Hardware Features

  • Emulation of all commercially available SPI NOR Flash with one click
  • Supports up to 2Gbit SPI NOR Flash emulation
  • Supports Single IO, Dual IO, and Quad IO
  • Quad IO supports SPI CLK up to 50MHz (AC switching power supply is required)
  • Automatic switching from 3.3V or 1.8V according to IC voltage specifications
  • Built-in 512MB buffer, supporting storage of a larger number of SPI trace logs.
  • Two-color LED status indicator
  • Supports 4-byte address mode option
  • Provides the option to use CS1 or CS2
  • Additional debugging function: SPI bus trace and HyperTerminal
  • Code update in less than 3 seconds
  • Powered by USB and palm-sized
  • Support for Windows 2003 and higher & support for 32-bit and 64-bit operating systems
Dediprog-EM100Pro-G2-Delivery-Content

Developer functions

  • Minutes become seconds when updating SPI NOR flash code.
  • Debug your application efficiently over the available SPI bus with our SPI trace, SPI trigger, SPI hyper terminal for debug messages
  • Develop your own application debugger using our bidirectional SPI hyper terminal and control the application from your host PC
  • EM100Pro-G2 can be connected to an Intel motherboard via a special adapter ISP-ADP-Intel-C (option).

Hardware Details

The EM100Pro-G2 has two 2.54mm connectors:

    • 2x2 for the reset and trigger signals
    • 2x10 for the emulation signals

EM100Pro-G2 is equipped with an ISP header and can be connected directly to the PCB via various cables/adapters. Please refer to Table 1 for the pinout of the EM100Pro-G2 2x10 header.

DediProg also offers the EM100Pro-G2 ISP cable which is used to connect the EM100Pro-G2 programmer to the 2X5 2.54mm ISP header on the PCB, see Table 2 for the EM100Pro-G2 ISP cable 2x5 pinout.

ISP Header Pin Out (2x10)
1NCCS22
3CS1Vcc4
5MISO/DQ1Hold/DQ36
7Wp/DQ2CLK8
9GNDMOSI/DQ010
113.3VNC12
13CTRLNC14
15CTRL3.3V16
17CTRLCTRL18
19GNDCTRL20
EM100Pro-G2 ISP Header Pin Out (2x2)
1GNDReset2
3GNDTrig4
ISP Cable Connector Pin Out (2x5)
1NCCS22
3CS1Vcc4
5MISO/DQ1Hold/DQ36
7Wp/DQ2CLK8
9GNDMOSI/DQ010

Software Features

Technical Data

Model
EM100Pro-G2
Internal memoryDDR DRAM
Buffer size For SPI Trace512MB
Emulation CapacityUp to 2Gbit
Emulating IC concurrentlyOne IC only with CS1 or CS2
Quad IO SupportUp to 50MHz
1.8V / 3.3V FWSwap automatically by IC model
SPI Bus activity indicatorDual color LED indicator

Accessories

Dediprog-EM-AD-RF16-KitDediprog-EM-AD-RF16-Kit-2
Reference Flash Adaptor Kit (SO16W)
EM-AD-RF16-Kit
While using the EM100Pro-G2, the user can use a real serial flash to check the developed codes.

€45.00*
Dediprog-EM-AD-RF8W-KitDediprog-EM-AD-RF8W-Kit-Board
Reference Flash Adaptor Kit (SO8W)
EM-AD-RF8W-Kit
The Reference Flash Adapter Kit (SO8W) is used to test the developed code on a real serial flash while using the EM100Pro-G2.

€45.00*
Dediprog-ISP-ADP-intel-C2
Intel ISP Adapter-C2
ISP-ADP-INTEL-C2
The Intel ISP Adapter-C2 is used to connect the SF600-G2,SF600Plus and EM100Pro-G2 to the Intel motherboard.

€20.00*
Dediprog-EM-TC-8
SO8 Testclip With 2x10 Connector
EM-TC-8
The SO8 test clip is used to connect the EM100Pro-G2, SF600 Plus and SF600-G2 to the main serial flash soldered on the board.

€99.00*
Dediprog-EM-SP-CBDediprog-EM-SP-CB-Pin-Layout
10-Pin Split Cable With 2x10 Connector
EM-SP-CB
The 10-Pin Split Cable has a 10 pin header which can be connected to the Serial Flash Emulator (EM100Pro-G2) and SF600-G2 programmer directly.

€45.00*