ATTEN MS300 3 in 1 Rework Station

Product no.: MS300

In Stock, Delivery within 1-2 working days

340.00

Netto

incl. 19% VAT

Volume Discounts on request       

Request quotation
 


Available delivery methods: DHL Express Delivery, DHL standard delivery | Switzerland, DHL standard delivery, DHL standard delivery, DHL standard delivery, Own carrier number
 

MS300 3 in 1 Rework Station

The ATTEN MS300 3 in 1 rework station consists of a hot air station (ST-862D), a soldering station (ST-965), a laboratory power supply (APS15-3A) and a rack kit for transport and installation.

 

 

1. ATTEN ST-862D Hot air station

 
The ATTEN ST-862D hot air soldering station is a unit with 1000 watts of power, whereby the station reaches operating temperature very quickly. The temperature can be set manually between 100 and 480 degrees ° C or set to one of three user-defined temperatures at the push of a button. The device has an adjustable volume flow (max. 120 L / min). With the silicone buttons, temperature & volume flow as well as a variety of built-in functions such as an auto-sleep function can be regulated. In addition, the system has an overheating protection system and a good cooling system that allows very long operation.

Duesen_ST-862D

 

 

 

Features

  • Patented heater for quick heating
  • Switchable between target and actual temperature.
  • Intelligent cooling system and delayed shutdown function to extend the service life of the handpiece.
  • LCD screen for visualization of the control.
  • Temperature adjustment protection, automatic time-controlled switch-off.
  • MCU-controlled temperature calibration, compensation for constant work.
  • High volume flow with brushless fan.
  • Convertible with Straight Air and Spiral Air.
  • Auto sleep function.

 

 

 

2. Soldering station ST-965

The Atten ST-965 soldering station has a high quality heating element with 65 watts of power. The ST-965 is equipped with a user-friendly display. The soldering station automatically lowers the temperature to 200 ° C when not in use. This enables a longer service life of the soldering tip. Three different soldering temperatures can easily be programmed individually and can be called up directly by pressing the appropriate selection key.

The soldering station is covered with a soldering holder. With 65 watts of power, the soldering tip heats up very quickly, and the high temperature stability (2 ° C) enables very precise work. The soldering station comes with a round soldering tip with a diameter of 0.2 mm. You can see more soldering tips under accessories.

ST-965_1
 

 

 

Features

  • Max. Power of 65 W, soldering iron 28 V AC
  • Very fast heating: from room temperature to 350 ° C only approx. 10 s
  • Internally heated soldering tip, fast and efficient heat transfer to the entire soldering tip
  • High-contrast multifunction LC display for status and programming display
  • Control of operational readiness by bar display
  • Soldering iron with flexible connection cable
  • Direct programming of all functions via a simple menu navigation and just a few buttons
  • Soldering tip temperature freely selectable between 200 ° C and 450 ° C
  • 3 freely adjustable temperature memories
  • Exact calibration of the temperature possible, calibration range ± 50 ° C
  • Temperature stability: ± 1 ° C (without load / MCU-controlled temperature calibration)
  • Temperature setting possible in 5-degree or 1-degree steps
  • Automatic, adjustable temperature reduction in soldering breaks to 200 ° C (1–120 min)
  • Protection against changing the soldering tip temperature
  • Warning in the event of device malfunctions
  • Acoustic feedback when a button is pressed (can be switched off)
  • ESD-safe design, low-voltage heating completely separated from the power supply
  • Freely adjustable soldering iron holder
  • Dim. (W x H x D): 168 x 95 x 110 mm
  • High quality four-wire heating element with silver alloy for quick heating
  • Intelligent detection of work or non-work status.
  • Low voltage heating separated from the power supply to make the soldering work safer.
  • Interchangeable 900M series (soldering tips) to save usage costs.
  • Password protection function and temperature unit switching function

 

 

 

 

 

 

3. Laboratory power supply APS15-3A

The APS15-3A is an adjustable laboratory power supply with a maximum output power of 56W. The voltage can be adjusted in fine steps between 0-15 V. The current intensity can be switched between 0.5 and 3A with a switch. The device has an LCD screen and an analog display. The power supply unit of the APS series was developed for the requirements of communication maintenance technicians, schools and developers. The product uses a series type regulated voltage scheme with the best current stability and is controlled by a digital MCU chip. It is characterized by very high stability and low residual ripple, simple operation and control as well as a large number of protective functions, it is particularly suitable for use in the communications industry.

APS-15-3A-removebg-preview
 

 

 

Features

  • Digital control, serial setting mode control, low ripple, low noise and high stability.
  • Suitable for use with communication devices.
  • Fast dynamic load response speed, optimized processing for communication devices.
  • The product is equipped with a shutdown self-recovery protection function and an over-temperature protection function.
  • Independent 5V USB interface that provides 2.1A current output with overcurrent and short circuit protection.
  • Voltage and current can be switched in 2 stages to adapt to different devices, the voltage can be adjusted dynamically.
  • Built-in automatic voltage response adjustment function, which may be more suitable for full load use.
  • The digital encoder adjusts the voltage and can switch between coarse adjustment and fine adjustment, more precise control and for a longer device service life.
  • Initial setting lock function, alarm function which can effectively prevent wrong operation.
  • Intelligent fan control is automatically controlled according to the temperature of the internal power supply.

 

 

 

 

 

 

 

Technical specifications

 

 
Model ST-862D
Power 1000 Watt
Temperature range 100 - 480
Temperature accuracy (outgoing air) 35
Volume flow (air) 120 L/min (max) | 30 L /min (min)
Setting range of the volume flow 10% - 100%
Available temperature units °F / °C
Standby cooling function Yes
Error detection Short circuit / missing heating element / overheating
Beep alarm function Available
Quick access 3 user-defined temperatures and flow rates
Temperature compensation 50°C
Heating status Display on LCD
Timing function 20s to 600s (Adjustable)
Temperature setting 10 Digits / 1 Digit (Fein-Tuning)
Volume flow adjustment 2 Digits / 1 Digit (Fein-Tuning)
Noise <52dB(A)
Operating temperatur 0℃~40℃

 

 

Model ST-965
Power 65 Watt
Temperature range 200°C - 450°C
Temperature offset range ±50°C
Temperature setting 5 digits (Default)/1 digit (Fine-tuning)
Temperature stability 1°C
Heater High quality four-wire wire heater with silver alloy
ESD Safe
Earth resistance < 2 Ohm
Earth potential < 2 mV
Dimensions 168 x 110 x 95mm
Weight 2.0 Kg
channel 1
Voltage 230 V / 50 Hz 
RoHS Conform

 

 

Model APS15-3A
Input Voltage AC 240V/230V/220V/110V/120V
Output Voltage 0-5V / 0-15V (dual steps)
Output Current 0,5A / 3A (dual steps)
Output Power 56 W (including USB output Interface)
Ripple & Noise cV ≤ 0,5mVrms
Line Regulation cV ≤ 0,01% + 3mV
Load Regulation cV ≤ 0,01% + 8mV
Read Back Accuracy 0.5 ± 2 digits (Display) / Class 2.5 (Current Pointer Class) 
Protection Function OCP (support automatically recover) / OHP
Other Functions Coarse tuning / fine tuning switch 5V / 15 V switch / 0,5 A- 3A switch and parameter locking
USB Interface Fixed 5V Output (±5%) maximum 2.1A output (overcurrent protection, stop outputting)
Heat-dispassing method Smart fan control
working condition Temp.: 0-40°c
RoHS Konform

 

 

 

 

 

Documentation 

 

MS300

 

MS300 User Manual

Download User Manual
20. June

 

 

 

 

 

Delivery Content

 

Included Components
1x ST862D Hot Air Station
4 x Düse
1 x Nozzle
1x Power Cord
1x ST-965 Soldering System
1x Soldering iron holder
1x Sponge
1x APS15-A3 Power Supply
1x Rack-Mount-Kit
1 X User Manual

We also recommend

*

Plus Vat for enduser and companies located in Germany

 

Customers who bought this product also bought

*

Plus Vat for enduser and companies located in Germany

 

Browse these categories as well: Soldering Systems, Rework Stationen, Hot Air Stations, Soldering Stations, Hot Air Stations, Rework Stationen