Waveform Capture Rate Up to 400,000 wfm/s

With a waveform capture rate of up to 400,000 wfm/s (sequence mode), the oscilloscope can easily capture low-probability events.

256-Level Intensity Grading

Events that occur more frequently are brighter (intensity grading) than events that occur less often. This allows you to quickly identify spurious signals.

Color Temperature Grading

Event frequency is shown using different colors (temperature grading). Frequent events are warmer the color. This helps to easily identify rare events.

Serial Bus Decoding Function

SDS1000X-E displays the decoding through the events list. Bus protocol information can be quickly and intuitively displayed in tabular format.

True Measurements on all Data

t any one timebase, the SDS1000X-E can measure using all 14M sample points. This ensures the accuracy of measurements while the math co-processor decreases measurement time and increases ease-of-use.

History Waveforms (History) Mode and Segmented Acquisition (Sequence)

Playback the latest triggered events using the history function. Segmented memory zcquisition will store the waveform into multiple (up to 80,000) memory segments, each segment will store triggered waveforms and timestamp each frame.

Gate and Zoom Measurement

Through Gate and Zoom measurement, the user can specify an arbitrary interval of waveform data analysis and statistics. This helps avoid measurement errors that can be caused by invalid or extraneous data, greatly enhancing the measurements’ validity and flexibility.

1 Mpt FFT

The new math co-processor enables FFT analysis of incoming signals using up to 1M samples per waveform. This provides high frequency resolution with a fast refresh rate. The FFT function also supports a variety of window functions so that it can adapt to different spectral measurement needs.

High Speed Hardware-Based Pass/Fail Function

The SDS1000X-E utilizes a hardware-based Pass/Fail function, performing up to 40,000 Pass / Fail decisions each second. Easily generate userdefined test templates provide trace mask comparison making it suitable for long-term signal monitoring or automated production line testing.

Customizable Default Key

The current parameters of oscilloscope can be preset to Default Key through the Save menu.

• 200 MHz Bandwidth
• 4 Channels
• Intelligent trigger: Edge, Slope, Pulse Width, Window, Runt, Interval, Timeout (Dropout), and Pattern
• Free Serial bus triggering and decoding:IIC, SPI, UART, RS232, CAN,  and LIN
• Video triggers and supports HDTV
• Low background noise and 500 μV / div to 10 V / div voltage scales
• 10 types of one-button shortcuts, supports Auto Setup, Default, Cursors, Measure, Roll, History, Display/Persist, Clear Sweep, Zoom and Print
• Segmented acquisition (Sequence) mode, dividing the maximum record length into multiple segments (up to 80,000), according to trigger conditions set by the user, with a very small dead time segment to capture the qualifying event.
• History waveform record (History) function, the maximum recorded waveform length is 80,000 frames
• Automatic measurement function on 38 parameters, supports Statistics, Gating measurement, Math measurement, History measurement and Ref measurement
• 1 Mpts FFT
• True measurement and math can use all 14 Mpts of memory
• Preset key can be customized for user settings or factory “defaults”
• Security Erase mode
• Highspeed hardware based Pass/ Fail function
• Large 7-inch TFT-LCD display with 800 * 480 resolution
• Multiple interface types: USB Host, USB Device (USB-TMC), LAN (VXI-11), Pass / Fail, Trigger Out
• Supports SCPI remote control commands
• Multi-language display and embedded help
• Browser control/onboard webpage for software free monitoring
• Bode plotting function controls external generator (SIGLENT SDG or SAG generators)

• Siglent SDS1000X-E ServiceManual 
• Siglent SDS1000X-E Series Datasheet
• Siglent SDS1000X-E Series Quick Start
• Siglent SDS1000X-E Series User Manual
• Siglent Programming Guide For Digital Oscilloscopes Series
• Siglent Probe Datasheet 
• Standard Probe Listing

How to use the Interval Trigger with a SIGLENT Oscilloscope

How to use the Edge Trigger on SIGLENT oscilloscopes

How to use the Dropout Trigger with SIGLENT Oscilloscopes

Learn how to use the dropout trigger to isolate signals that are below a set trigger value and are missing information.

Capture and transfer waveforms

Learn how to easily capture and transfer waveform data from a SIGLENT SDG oscilloscope to an SDG function generator. Once the data has been transferred to the SDG, you can edit and adjust the waveform and perform extended testing.

Find the 3 dB point of a filter using an oscilloscope and function generator

In this video, Siglent shows how to characterize a filter using a scope and function generator. They also compare the scope/gen data to the same filter tested using a spectrum analyzer and tracking generator.

Basics of the FFT function on SIGLENT Oscilloscopes

This video is a basic description of the FFT functionality of SIGLENT oscilloscopes

​

The Sequence Function for SDSX and X-E series Oscilloscopes;

Learn how to capture and replay multiple trigger events using sequence mode.

Shipment

• USB Cable -1
• Quick Start -1
• Passive Probe -4
• Certification -1
• Power Cord -1
• SDS1204X-E