€1,699.00*
- 3 Years Warranty
- 2.5% advance payment discount
- If you use the payment method in advance by bank transfer, 2.5% of the purchase amount will be automatically deducted at the checkout.
Delivery time: 1 week
Description
The Handheld Oscilloscope SHS1202X is a high quality two channel storage oscilloscope, which allows a mobile use due to the available battery. The device has a sampling rate of 1 GSa/s, a bandwidth of up to 200 MHz and a memory depth of 12 Mpts.
Features
- Isolation voltage: CATIII 600 Vrms, CATII 1000 Vrms
- Integrated oscilloscope, serial trigger and decoder, spectrum analysis, data logger, and multimeter functions in a convenient and portable design
- Models with 100 MHz or 200 MHz bandwidth
- Sampling rate of 1 GSa/s (single channel)/500 MSa/s (dual channel)
- Recording length up to 12 Mpts.
- Hardware based true RMS multimeter
- IP51 certified dust/water protection
- Signal acquisition rates up to 100,000 wfm/s (normal mode) and 400,000 wfm/s (sequence mode)
- Supports 256-level intensity gradation and color temperature display modes
- Recording length up to 12 Mpts
- Digital trigger system
- Intelligent trigger: edge, slope, pulse width, window, runt, interval, timeout (dropout), pattern
- Digital multimeter with 6000 counts, supports DCV, ACV, DCI, ACI, resistance, diode, capacitance, continuity test.
- 3 one-button shortcuts for oscilloscope, multimeter and recorder functions.
- 5.6 inch TFT LCD display with 640 * 48 resolution
Hardware details
The Siglent SHS1202X have several powerful trigger modes, including serial bus triggering as well as free decoding for IIC, SPI, UART, CAN, LIN bus types. The Siglent SHS1202X also include history waveform recording and sequential triggering for advanced waveform recording and analysis. Another powerful addition is the new 1-million-point FFT math function, which gives the SHS very high frequency resolution when observing signal spectra. The Siglent SHS1202X have built-in sample and measurement recorders. The sample recorder can achieve a maximum sampling rate of 25 kSa/s and record for up to 22 hours. The SHS1000X series offers complete isolation between the two oscilloscope channels, a multimeter channel, the power supply, and the USB host/device port. The full isolation makes it ideal for lab and floating signal measurements by reducing the risk of accidental short circuits. The Siglent SHS1202X includes a 6000-count digital multimeter isolated from the oscilloscope that can measure dc/ac voltage, dc/ac current, resistance, capacitance, diodes, and continuity, capacitance, diodes, and continuity. It also has a data logger function. The maximum voltage input for the analog channels is CATIII 600 Vrms, CATII 1000 Vrms. And the maximum input for the multimeter is CATIII 600 Vrms, CATII 1000 Vrms. The operating time of the supplied battery is up to 5.5 hours, the battery is charged in the device when connected to the power supply. For intensive use in the field, the purchase of one or more spare batteries is recommended. Weight of the device 1.75 kg. The Siglent SHS1202X has a well-designed and easy-to-use user interface, while providing extensive convenience features for all measurement tasks.
Intelligent triggers
The following trigger types are available to the SHS1202X oscilloscope
- Flank
- Slope
- Pulse width
- Window
- History
- Interval
- Time lapse
- Pattern
Product highlights
256-level gradation & color temperature display
The color temperature display is similar to the intensity graded curve function, but the occurrence of the curve is represented by different colors (color "temperature"). Red colors represent events that occur more frequently, while blue is used to mark points that occur less frequently.
Measured values logger
The measured value logger logs measured values over a longer period of time. The amount of measurement data is too small to process it quickly. For this reason, the data is logged in the memory. After the logging is finished, the data can be stored in the internal flash memory or on an external U-Disk.
Sample logger
The Sample Logger is the mode in which the samples are recorded over a longer period of time. When many sample points need to be logged, they are stored in real time in the internal flash memory or on an external hard disk. After the logging is finished, the user can recall the sample points on the oscilloscope or analyze the stored data on the computer.
1M points for the calculation of the FFT
The new mathematical co-processor enables FFT analysis of incoming signals with up to 1 million samples per waveform. This enables high frequency resolution with a fast update rate. The FFT function also supports a variety of window functions, allowing it to adapt to different spectrum measurement requirements.
Portable & easy operation
The front is smaller than A4 paper and reduces the size of the instrument, the support frame on the back supports vertical placement, and the side nylon handles are convenient for hand operation. The standard shoulder bag can hold the hull and probe and other accessories at the same time, which is easy to carry when going out.
IP rating:
IP51
The handheld oscilloscopes feature a sealed, dust and drip-proof IP51 enclosure and have been tested to IEC60529 to ensure the ruggedness required for use in harsh environments. A rubberized surface with large buttons facilitates use in challenging environments.
Higher level of protection, longer battery life
High capacity rechargeable 6900mA lithium battery. Up to 5.5 hours of operation without recharging, which greatly improves safety and battery life. The included carrying case provides ample space for the instrument, probes and other accessories. Perfect for working in the field and taking with you on business trips.
Recording length of up to 12 Mpts
With hardware-based zoom technologies and a maximum recording length of up to 12 Mpts, users can use oversamples to capture longer periods of time at higher resolution and use the zoom function to see more detail within each signal.
Up to 400,000 wfm/s signal acquisition rate
With a waveform capture rate of up to 400,000 Wfm/s (sequence mode), the oscilloscope can easily capture unusual or unlikely events.
Serial decoding functions
The Siglent SHS810X displays decodes via the event list. Bus log information can be quickly and intuitively displayed in a table format.
Digital multimeter with 6000 counters
6000 count digital multimeter with DCV, ACV (true RMS), DCI, ACI, diode, resistance, capacitance and continuity functions.
Technical Data
| Model comparison |  SHS810X |  SHS820X |  SHS1102X |  SHS1202X |
|---|---|---|---|---|
| Channels | 2 | 2 | 2 | 2 |
| Max. Bandwidth | 100MHz | 200MHz | 100MHz | 200MHz |
| Sample Rate & Memory Depth | 1 GSa/s & 12 Mpts (1 channel) 500 MSa/s & 6 Mpts (2 Channel) | 1 GSa/s & 12 Mpts (1 channel) 500 MSa/s & 6 Mpts (2 Channel) | 1 GSa/s & 12 Mpts (1 channel) 500 MSa/s & 6 Mpts (2 Channel) | 1 GSa/s & 12 Mpts (1 channel) 500 MSa/s & 6 Mpts (2 Channel) |
| Dynamic range | 400,000 wfms/s | 400,000 wfms/s | 400,000 wfms/s | 400,000 wfms/s |
| Isolated channels | X | X | ✓ | ✓ |
| Max. Input Voltage | oscilloscope CAT II 300 Vrms betw. BNC signal & Earth CAT II 30 Vrms between. BNC GND & Earth CAT II 300 Vrms between. BNC signal & BNC GND Multimeter CAT III 300 Vrms, CAT II 600 Vrms | oscilloscope CAT II 300 Vrms betw. BNC signal & Earth CAT II 30 Vrms between. BNC GND & Earth CAT II 300 Vrms between. BNC signal & BNC GND Multimeter CAT III 300 Vrms, CAT II 600 Vrms | Oscilloscope Multimeter | Oscilloscope Multimeter |
Documentation
Accessories
