3 - 3 of 5 results

Total Phase Aardvark I2C/SPI Host Adapter

Product no.: TP240141

In Stock, Delivery within 1-2 working days

330.00

Netto

incl. 19% VAT

Volume Discounts on request       

Request quotation
 


Available delivery methods: DHL Express Delivery, DHL standard delivery | Switzerland, DHL standard delivery, DHL standard delivery, DHL standard delivery, Own carrier number

Aardvark I2C / SPI host adapter

The Aardvark I2C / SPI host adapter is connected via USB and is a powerful and fast I2C and SPI host adapter. Developers can connect a Mac, Linux computer or Windows PC to the embedded system environment and transfer the serial data streams using the I2C and SPI protocols.

 

I2C

  • Real 800 kbps † performance over USB with higher bandwidth versus slower RS-232.
  • Supports standard mode (100 kbps) and fast mode (400 kbps) as well as varying speeds from 1 kHz to 800 kHz †.
  • Supports the stretching of inter-bit and inter-byte clocks.
  • Supports multi-master.
  • Master send and receive.
  • Asynchronous slave sending and receiving.
  • Software configurable I2C pull-up resistors.
  • Software-configurable target power pins for powering downstream devices.
  • Repeated starts, 10-bit slave addressing, and transactions in the combined format.

 

The Aardvark I2C / SPI host adapter is compatible with

  • Show data channel (DDC)
  • System Management Bus (SMBus)
  • Power Management Bus (PMBus)
  • Smart Battery Bus (SBBus)
  • Intelligent Platform Management Interface (IPMI)
  • Two-wire interface (TWI)

† Actual system bus speed may vary based on capacity.

 


SPI

  • Works in master or slave mode.
  • Master signaling rate of up to 8 Mbit / s.
  • Slave signaling rate of up to 4 Mbit / s.
  • Send / receive full duplex master.
  • Asynchronous slave sending / receiving.
  • Software-configurable target power pins for powering downstream devices.
  • Software configurable slave select (SS) polarity in master mode.

 


GPIO - General Purpose IO

I2C and SPI pins can be used for more general use, so they can be used for custom signals on target systems. The GPIO functionality can also be combined with I2C or SPI to interact with your target system. The GPIO configuration is cached internally in order to retain the settings between the operating modes.

 


Cost-efficient and time-saving

The Aardvark adapter comes with a license-free API. The low costs of the Aardvark allow companies to provide each developer with their own I2C / SPI interface. This allows developers to fix simple problems directly and quickly instead of requesting the release of additional tools and having to solve problems in the lab. Less time spent means higher productivity as developers can identify and fix problems quickly and easily with less downtime. Higher productivity means shorter development cycles. Projects are completed on time and on budget.
By saving just a few hours of engineering time, the Aardvark adapter has paid for itself.

 


Future proof

The Aardvark adapter can be fully updated on site via USB. The Aardvark adapter is constantly being improved and made available to customers free of charge.

You never have to worry about not keeping up with the latest software features. Authorized software and firmware upgrades are always freely available in the download area of ​​this website.

 


Available software

  • With the Control Center, developers can fully use the functions of I2C, SPI and GPIO within a few minutes. Multiple Promira platforms or Aardvark adapters can easily be used at the same time. There is a virtually unlimited number of configurations that engineers can use to develop and test their embedded systems.
  • Total Phase's Flash Center Software is a software package that enables engineers to quickly erase, program, and verify I2C and SPI-based EEPROM and Flash memory chips.
  • APIs, Labview Driver and more ...

 

Supported ICs

With the help of the Flash Center, I2C EEPROMSs & SPI EEPROMs / Flashs can be easily flashed. See under supported devices which ICs are already supported by the Flash Center. Unsupported ICs can be added within a minute thanks to the self-expandable database.

Accessories

Product Note Status Price
Total Phase I2C Development Kit Total Phase I2C Development Kit
Complete solution for I2C projects
749.00 € *
SPI Development Kit SPI Development Kit
Complete solution for SPI projects
790.00 € *
Total Phase SPI Flash Programming Kit Total Phase SPI Flash Programming Kit
Complete solution for I2C Memory devices
490.00 € *
Level Shifter Board Level Shifter Board
Aardvark Add on
128.00 € *

Product data sheet

10-Pin Grabber Clip Split Cable 10-Pin Grabber Clip Split Cable
Aardvark Add on
55.00 € *
10-Pin Split Cable 10-Pin Split Cable
Aardvark Add on
36.00 € *
Flash SOIC-8 Sockel Board Flash SOIC-8 Sockel Board
Aardvark Add on
Cheetah SPI Host Adapter Cheetah SPI Host Adapter
SPI Programming
395.00 € *

Product data sheet

Promira Serial I2C/ SPI/ eSPI Platform Promira Serial I2C/ SPI/ eSPI Platform
Promira is a universal hardware platform usable for a variety of applications, like I2C, SPI and eSPI,
from 1,060.00 € *

Product data sheet

High-Speed SPI Flash Demo Board High-Speed SPI Flash Demo Board
80.00 € *
DVI DDC Breakout Cable DVI DDC Breakout Cable
87.00 € *
VGA DDC Breakout Cable VGA DDC Breakout Cable
87.00 € *
EEPROM Socket Board - 10/34 EEPROM Socket Board - 10/34
164.00 € *
TP282410 Flash SOIC-16 Socket Board - 10/34 TP282410 Flash SOIC-16 Socket Board - 10/34
105.00 € *

Product data sheet

Flash SOIC-8 Socket Board - 10/34 Flash SOIC-8 Socket Board - 10/34
115.00 € *
*

Plus Vat for enduser and companies located in Germany

 
Display accessory details

Customers who bought this product also bought

10-Pin Split Cable
36.00 *
*

Plus Vat for enduser and companies located in Germany

 

Browse these categories as well: Host Adapter, SPI Bus, eVision Systems Test & Measurement Technology, I²C Bus, I2C Slave Addressing with 7-bit, 8-bit, and 10-bit, Reading EDID data from DVI monitor EEPROM using Aardvark adapter and DVI DDC Breakout Cable, Cypress CY14MB064J programming with an Aardvark, Reading Device ID from SPI Flash Using Aardvark Adapter and Control Center, How can I send large data transactions, messages greater than 64 bytes, using the Aardvark, Total Phase, SPI, Memory Chip Programmer, SPI Flash NOR / NAND, EEPROM, I²C, I2C EEPROM Programming using Aardvark Adapter and Control Center Batch Mode, Programming Lattice FPGA's with an Aardvark, SPI/I2C Slave AA_COMMUNICATION_ERROR using an Aardvark, Unable to program TPS65982-EVM using the Aardvark.dll
3 - 3 of 5 results