Cable Accessories

10-Pin Grabber Clip Split Cable makes it easy to connect your Aardvark I2C/SPI Host Adapter, Beagle I2C/SPI/MDIO Protocol Analyzer, or Cheetah SPI Host Adapter to your target with individual flying leads.

This cable attaches to the ribbon cable on the Aardvark I2C/SPI Host Adapter or the Beagle I2C/SPI/MDIO Protocol Analyzer and provides individual leads for each pin.

The Digital I/O Cable with Grabber Clips provides grabber clips to help connect the digital IO interface of the Beagle USB Protocol Analyzers and Komodo CAN Interfaces to external logic.

The CAN Terminator is a DB9-Male plug that terminates the CAN lines with a 120 ohm resistor.

The CAN Split Cable is a 1 ft cable with 2 DB9-male connectors on one end and 1 DB9-female connector on the other. This cable is useful to tap an existing CAN network with the Komodo CAN Solo or the Komodo CAN Duo Interface.

This is a replacement cable for the Promira Serial Platform.  The 34-pin end has a locking friction ramp to ensure good connectivity with the  Promira  Serial Platform, while the end is a 10-pin, 5x2 0.010" standard header.

2m DVI cable with DDC breakout header

This is a replacement cable for the PromiraTM Serial Platform.  

This cable attaches to the ribbon cable end directly on the Promira Serial Platform and allows you to connect any of the 34 Promira platform pins to your target.  

This package contains one 34-Pin Split Cable along with 10 grabber clip ends that slide onto the split cable. 

Grabber Clip Ends slide on to all Total Phase split cables.

The USB OTG Mini-Plug Cable Set provides two convenient cables for the USB OTG developer to use with either the Beagle USB 5000 v2 Protocol Analyzer, the Beagle USB 480 Protocol Analyzer or the Beagle USB 12 Protocol Analyzer.

This power kit includes one 5 foot Cat 5 Ethernet cable and our USB Micro B Universal Power Adapter.

SMA cable for digital input or output on the Beagle USB 5000 SuperSpeed Protocol Analyzer

Connect USB devices quickly and easily to the Beagle USB 12 Protocol Analyzer or the Beagle USB 480 Protocol Analyzer with the USB A-B 1 ft cable.

Connect USB devices with captive USB-A connectors quickly and easily to the Beagle USB Protocol Analyzers.

This power adapter enables you to power your Promira™ Serial Platform directly from any wall outlet.

2m VGA cable with DDC breakout header

The A2B cable is a 30 cm, unshielded twisted pair cable. One end of the cable terminates in a Mini50 connector, the other end terminates in a DuraClik connector.

This A2B cable is a 1 meter, unshielded twisted pair cable. One end of the cable terminates in a Mini50 connector. The other end is tinned ends.