Available delivery methods: Siglent Promotional shipping, DHL Express Delivery, DHL standard delivery | Switzerland, DHL standard delivery, DHL standard delivery, DHL standard delivery, Promotional shipping, Software / license, Own carrier number
Check signal levels of your home or office WiFi networks
Measure network speed and throughput
Locate sources of interference to your network
Scan for hot spots in your local area (wardriving)
Wifi Network Overview
View a detailed list of all the access points your network card detecs, plus your connected network. See details such as Status, SSID, the principle channel the network is using, channel width, security settings, supported data rates, MAC adresses plus information such as the time period the access point was first seen and when it was last active.
Track the number of dropouts per access point, useful when checking long term stability.
Measure Network Speed and Stability
Run extensive tests to measure and graph the stability and speed your WIFI connection. Help isolate and locate drop outs and the causes of unreliable connections.
Wireless Lan Information
WirelessMon can report a large variety of in-depth LAN information (when available) such as:
Statistics information: More than 30 parameters are reported. Including a detailed breakdown of frames sent and received, error counts, transmission retry counters and related low level data.
TCP/IP information: Includes adapter MAC address, Adapter device driver name, the IP Adress, Subnet Mask, if DHCP is enabled, the Gateway Address and the DHCP server IP address.
IP counter information: Network throughput is monitored and displayed, Includes maximum bandwidth available, current send and receive data rates, plus error counters.
Wireless Mon can also be reducted to a "Mini window" mode that appears as an overlay in the top right corner of your screen that provides on going surveillance of your signal strength.
Extensive Signal Strength Mapping
Create Signal Strength Maps (aka heatmaps) of your home, office or local neighbourhood. Determine areas of weak Wi-Fi that might require singal repeaters, or areas which are congested with oter Wi-Fi networks.
WirelessMon supports GPS for logging and Mapping, though you can create maps without the use of a GPS device.
The HEX mapping functionality uses hexagons to gradually construct a map of the singal strengths of access points. It uses current location and singal strength information to build out a picture of your singal strength.
With the contour mapping functionality, this map predicts the signal strength around the sample point, building out a morge accurate map of our singal in your location.
By adding the location of your router on your map, WIrelessMon will calculate signal loss based on obstructions detected. This handy feature allows insight to the accessiblity and network speed in ervery corner of your home or office.
Optimized Channel Selection
WirelessMon includes multiple features which highlight channel usage and congestion across the detected access points in your location. Our Spectrum Analyser visualises these networks across both their channel and signal strength in dBm – quickly allowing you to identify areas of congestion and effectively identify a channel what could be used as a new access point.
WirelessMon can identify and display channel width. This is visualised in the graph where an access point using 40Mhz channels is displayed as twice the width of an access point using 20Mhz channels.
Connect via MAC Address
WirelessMon has the ability to display intermittent and hidden access points - those with a MAC address, but not a SSID. The access point connection window allows you to connect to an Access point via a MAC address. This can be used when there are multiple Access Points with the same name.
Any wireless adapter that complies with the NDIS_802.11 (which is most of them) should be able to report information to WirelessMon. All the various IEEE 802.11 standards are supported, including 802.11a, 802.11b and 802.11g. 802.11N and 802.11AC.
From version 4 some Garmin USB GPS devices (developed using the standalone OEM USB units) are supported via USB connection.
Windows 7 & Windows 10 support this software.
Windows Vista, Windows 7, Windows 8, Windows 10, 2003 Server, 2008 Server, 2008 R2 Server, 2012 Server, 2012 R2 Server. Available for both 32-bit and 64-bit platforms.
256 MB RAM, DirectX 9.0c, DirectX 11 for GPGPU tests, 225MB disk space (more required to run the disk test). Hardware loopback plugs for port testing (Professional Edition only).