Homepage Manufacturer Aldec TySOM Boards
TySOM Embedded Prototyping Boards
Recently, FPGA vendors have released SoC FPGAs that integrate ARM®-based microprocessors with their respective high-performance FPGA technology in a single chip to enable more robust integration of
embedded designs. Developers who create a complex embedded design need only a single integrated IC with a microprocessor, DSP and FPGA to optimize system performance, flexibility and scalability. SoC FPGAs such as Xilinx® Zynq ™ contain the FPGA technology of the ARM Cortex ™ -A9 and Xilinx 7000 series with different capacities of logic cells, BRAM, DSP slices and I / O pins.
With such powerful devices, designers can create even more complex embedded systems. To do this, however, they need industry-proven, powerful development tools and prototyping platforms. eVisionSystems meets this demand with TySOM - the new series of development and prototyping boards with Xilinx Zynq devices and a complete set of peripheral devices and interfaces.
There is no doubt that mere hardware is not enough for the first success of a complex embedded system. Choosing the right hardware design and verification tools for the FPGA simulation and software development environment for processors and microcontrollers is as important as choosing a hardware platform.
TySOM device family
TySOM is a family of development boards for embedded applications that have all of the programmable Xilinx® Zynq ™ modules that combine FPGA with ARM® Cortex processor. Thanks to the large number of peripheral devices supplied, these cards are suitable for various embedded applications such as automotive, IoT, industrial automation or embedded HPC.
TySOM-1 Embedded Prototyping BoardProduct no.: TySOM-1TySOM-1 is a compact board containing medium size Xilinx Zynq-7000 All Programmable FPGA with dual-core ARM Cortex A9 and rich selection of peripherals to provide a complete and universal physical prototyping platform for a broad range of embedded designs and IoT applications. |
FMC-ADAS Automotive Daughter CardProduct no.: FMC-ADASThe FMC-ADAS daughter card enables the prototyping of designs for vehicle and driver assistance systems with TySOM motherboards. |
TySOM-3 Embedded Prototyping BoardProduct no.: TySOM-3TySOM-3-ZU7 is a compact prototyping board with Zynq® UltraScale + ™ MPSoC device, the 64-bit processor scalability north and control control with various and hard motors for graphics, video, waveform and packet processing. |
TySOM-M-MPFS250 Prototyping BoardProduct no.: TySOM-M-MPFS250TySOM-M-MPFS250 is designed to assure flexibility in selecting peripherals to leverage all the features of PolarFire MPFS250 device. |
TySOM-1A Embedded Prototyping BoardProduct no.: TySOM-1ATySOM-1A is a compact board containing Xilinx Zynq-XC7Z010 All Programmable device with dual-core ARM Cortex A9 and a selection of peripherals to provide a complete prototyping platform for embedded system designs and IoT applications. |
FMC-INDUSTRIAL Industrial Communication Daughter CardProduct no.: FMC-INDUSTRIALThe FMC-INDUSTRIAL card enables prototyping of industrial applications for which serial communication interfaces are required. |
TySOM-3A Embedded Prototyping BoardProduct no.: TySOM-3ATySOM-3A-ZU19EG is a compact SoC prototyping board featuring Zynq® UltraScale+™ MPSoC device which provides 64-bit processor scalability while combining real-time control with soft and hard engines for SoC prototyping solution, IP verification, graphics, video, packet processing and early software development. |
FMC-INTF Interface Daughter CardProduct no.: FMC-INTFThe FMC-INTF daughter card offers a good selection of commonly used peripheral devices such as PCIe, Gigabit Ethernet, USB and more. |
TySOM-2 Embedded Prototyping BoardProduct no.: TySOM-2TySOM-2 is a compact prototyping board that is produced with XC7Z100 chip - the largest capacity among Zynq 7000 family devices. |
FMC-IOT Internet-of-Things Daughter CardProduct no.: FMC-IOTThe FMC-IOT daughter card offers peripheral devices and interfaces that are used in embedded designs and are the key to IoT |
TySOM-2A Embedded Prototyping BoardProduct no.: TySOM-2ATySOM-2A is a compact prototyping board containing mid-range Zynq-7000 module (Z-7030). |
FMC-NET Networking Daughter CardProduct no.: FMC-NETThe FMC-NET card enables prototyping of network designs by providing peripheral devices such as Gigabit Ethernet, WLAN and others. |
FMC-NVMe High-Bandwidth, Low Latency Memory Expansion CardProduct no.: FMC-NVMeFMC-NVMe expansion daughter card provides four NVMe interfaces (two on top and two on bottom side of the board). |
FMC-PCIe High-Bandwidth | High Throughput Serial Bus Daughter CardProduct no.: FMC-PCIeThe FMC PCIe expansion daughter card is used as a PCIe root complex and Nord has two PCIe x4 interfaces or one PCIe x8 interface. |
FMC-QSFP High Speed Links Daughter CardProduct no.: FMC-QSFPFMC-QSFP card provides QSFP+ and SFP+ extension of FPGA prototyping boards with standard FMC connectors. |
FMC-VISION Multimedia Daughter CardProduct no.: FMC-VISIONThe FMC-VISION card offers multimedia interfaces for monitors and cameras, which are common in various designs such as embedded vision. |
Plus Vat for enduser and companies located in Germany
Good Reasons for eVision
|
Payment methods
|
My Account
|
Legal Terms
|
Our best price gurantee |
Invoice | Request a qoute | Imprint |
| Expert advise | Paypal | Login | Terms of Service |
| Fast delivery | Visa | My Account | Right of withdrawal |
| Many payment methods | Mastercard | My Cart | Privacy |
| Best Service | Prepayment | Shipping and Payment | |
| Low shipping Costs | Battery Regulation | ||
|
|
© 2020 eVision Systems GmbH . All Rights Reserved
|
|
|
