Features
This cable has a 34-pin connector to attach to your Promira Serial Platform on one end, a 10-pin box header that attaches to your project.
The project side connector is a standard 5x2 0.100" (2.54mm) pitch IDC type keyed box connector. The cable is only 5 inches (12.7cm) long to minimize signal degradation.
The 34-Pin Header Cable has a 34-pin box header that attaches to the Promira Serial Platform. The connector is a standard 2x17, 0.079 inches (2.00 mm) pitch IDC type keyed box connector. The cable is only 6 inches (15.2 cm) long to minimize signal degradation.
10-pin connector pin specification
I2C/SPI |
eSPI |
MDIO |
# |
|
# |
I2C/SPI |
eSPI |
MDIO |
SCL/SS1/GPIO-0 |
Alert#-0 |
|
1 |
|
2 |
GND |
GND |
GND |
SDA/SS2/GPIO-1 |
CS2/Alert#-1 |
|
3 |
|
4 |
VTGT1 |
VTGT1 |
VTGT1 |
MISO/GPIO-2 |
IOO |
MDIO |
5 |
|
6 |
VTGT2 |
VTGT2 |
VTGT2 |
SCK/GPIO-3 |
SCK |
MDC |
7 |
|
8 |
MOSI/GPIO-4 |
IO1 |
|
SS0/GPIO-5 |
CS0 |
|
9 |
|
10 |
GND |
GND |
GND |