Description
The Advanced Cable Tester v2 Connection Module: USB 3.1 Standard-A to USB 3.1 Standard-B enables testing of cables with USB 3.2 / USB 3.1 / USB 2.0 Standard-A on one end and USB Standard-B on the other end of the cable. This module has a USB 3.1 standard A socket and a USB 3.1 standard B socket. Each module uses a proprietary finger-style connector that can only be used with the Advanced Cable Tester v2.
Key Features
- Measure the DC resistance of VBUS and GND cables individually
- Measure the DC resistance of the VBUS and GND pins on the USB Type-C connector individually
- Make sure the wiring is correct and that no wires are shorted or broken
- USB 2.0 pair testing is supported at around 518 Mb/s, and all existing SuperSpeed pairs are tested at 5 Gb/s or 10 Gb/s.
Compatibility Test
- USB 2.0 Hi-Speed cable pair
- USB 3.1 Gen1 / Gen2 and USB 3.2 SuperSpeed wire pairs (Tx + Rx)
- VBUS DC Resistance Test
- GND DC resistance test
Inserts
- Insertion / test counter tracking ensures reliable operation.
- Total Phase uses the highest quality connectors available in our Advanced Cable Tester devices. The expected service life of the Advanced Cable Tester v2 is 10,000 tests per module without test acceptance.
- All termination modules require the use of Total Phase Advanced Cable Tester v2.
Additional connection modules
- USB Type-C to USB Type-C (USB 3.2 and earlier specifications). Fully featured and USB 2.0 Type-C cables are supported
- USB Type-C to USB Micro-B (USB 3.2 and earlier version specifications)
- USB Type-C to USB Standard-B (USB 3.2 and earlier version specifications)
- USB Type-C to USB Standard-A (USB 3.2 and earlier version specifications)
- USB Standard-A to USB Micro-B (USB 3.2 and earlier version specifications)
- Lightning (USB 2.0) to USB Standard-A
- Lightning (USB 2.0) to USB Type-C
- HDMI to HDMI (HDMI 2.1 and earlier version specifications)
- DisplayPort to DisplayPort (DisplayPort 1.4 and earlier version specifications)